These affordable and full-featured pumps are designed for lower-volume up to 3175 kg./year (7,000 lb./year) applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor – Provides more power to create better flow.

• Engineered for Durability – Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer lasting solution.

• Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Pilot Valves – Patented self-cleaning design increases reliability in dirty air environments and minimises pressure drop with rapid changeovers for reduced stalling and smoother flow.

SKU: 24J030

These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LD™ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

• Three Inch Air Motor – Provides more power to create better flow.

• Innovative Air Valve – Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.

• Engineered for Durability – Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer lasting solution.

• Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Pilot Valve – Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.

• Adjustable Bung Adapter Included – Built-in slide adjustment with easy-set hand screws can fit into more applications.

• Built-In Thermal Relief and Inlet Strainer – Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

Available in 3 Sizes:

• For 35lb (16kg) Pail - 24G600

• For 120lb (55kg) Drum - 24G603

• For 400lb (180kg) Drum - 24G606

SKU: 24G600, 24G603, 24G606

These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LD™ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

• Three Inch Air Motor – Provides more power to create better flow.

• Innovative Air Valve – Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.

• Engineered for Durability – Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer lasting solution.

• Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Pilot Valve – Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.

• Adjustable Bung Adapter Included – Built-in slide adjustment with easy-set hand screws can fit into more applications.

• Built-In Thermal Relief and Inlet Strainer – Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

Available in 3 Sizes:

• Universal With Bung Adaptor - 24G588

• To Suit 200L Drums With Steel Downtube - 24G594

• To Suit 1040L Pods With Steel Downtube - 24G597

These affordable and full-featured pumps are designed for low volume applications to provide long life and serviceability. LD™ has a powerful three inch air motor to deliver the fluids you need while the built-in thermal relief protects your equipment from thermal expansion.

• Three Inch Air Motor – Provides more power to create better flow.

• Innovative Air Valve – Designed to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.

• Engineered for Durability – Patent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer lasting solution.

• Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Pilot Valve – Patent-pending, self-cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.

• Adjustable Bung Adapter Included – Built-in slide adjustment with easy-set hand screws can fit into more applications.

• Built-In Thermal Relief and Inlet Strainer – Built-in thermal relief protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump

Available in 3 Sizes:

• Universal With Bung Adaptor - 24G576

• To Suit 200L Drums With Steel Downtube - 24G582

• To Suit 1040L Pods With Steel Downtube - 24G585

SKU: 24G576 , 24G582, 24G585

The GT 750 pump was engineered to perform in challenging applications and changing environments. The large 190 mm (7.5-inch) air motor and pump lower combination allows the GT 750 pump to move the same amount of grease with up to four times fewer pump strokes.

• Efficient Air Motor – Use less air to move more grease.

• High Flow Rates – Up to 13.6 kg/min (32 lb/min) of grease.

• High Volume Per Stroke – Pump more grease without having to drive pump too quickly to damage seals.

• Proven Pump Technology – Based on Graco NXT™ pump technology.

• Multiple Tank Options – Available in 16, 54 and 181 kg (35, 120 and 400 lb) down tube lengths.

SKU: 24W337

These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor – Provides more power to create better flow.

• Engineered for Durability – Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer lasting solution.

• Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Pilot Valves – Patented self-cleaning design increases reliability in dirty air environments and minimises pressure drop with rapid changeovers for reduced stalling and smoother flow.

• Built-In Thermal Relief and Inlet Strainer – Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

Available in Multiple Variations:

• 3:1 Preset Meter Type - 24H728

• 5:1 Manual Meter Type - 24H892

SKU: 24H728, 24H892

• Three Inch Air Motor – Provides more power to create better flow.

• Engineered for Durability – Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer lasting solution.

• Modular Air Valve – Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Pilot Valves – Patented self-cleaning design increases reliability in dirty air environments and minimises pressure drop with rapid changeovers for reduced stalling and smoother flow.

• Built-In Thermal Relief and Inlet Strainer – Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

Multiple Variations Available:

• 3:1 Mobile Oil Pump package with Manual Meter: 24H751

• 5:1 Mobile Oil Pump package with Pre Set Meter: 24H918

• 50:1 Mobile Grease Pump package: 24J066

SKU: 24H751, 24H918, 24J066

The Fire-Ball 425 features a large air motor to supply the power you need for long pipe runs and higher volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.

The Fire-Ball 425 is the pump of choice for your most demanding high volume applications.

• Durable Casting – Thick cast aluminium air motor housing offers unmatched durability.

• Fewer Repairs – Fewer moving parts in the air motor assembly means less downtime and low repair cost.

• Superior Sealing — Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.

• Extended Seal Life – In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.

• Corrosion-Resistant – Corrosion-resistant design utilises liquid salt nitriding, nickel plating, stainless steel, aluminium and chrome on key components for longer life.

Available in Various Sizes and Ratio’s

• Stubby 10:1 - 965124

• 180kg 10:1 - 965129

• 180kg 50:1 - 205395

• 180kg 75:1 - 239730

SKU: 965124, 965129, 205395, 239730

Install the Fire-Ball 300 5:1 in high pressure, medium volume oil transfer applications such as automotive dealerships, fast lube centres and service shops.

• Reliable Flow – A 76.2 mm (3 inch) differential air motor and the double-acting pump design provides reliable fluid flow and accurate dispense.

• Durable – Thick cast aluminium air motor housing offers unmatched durability.

• Fewer Repairs – Fewer moving parts in the air motor assembly means less downtime and low repair cost.

• Extended Seal Life – In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.

• Reduce Downtime – Displacement rods have minimal wear due to a proprietary Graco manufacturing process.

• Superior Sealing — Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.

• Reduced Icing – Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.

• Corrosion-Resistant – Corrosion-resistant design utilises liquid salt nitriding, nickel plating, stainless steel, aluminium and chrome on key components for longer life.

  Available in 3 different configurations:

• 60 Litre (16 Gallon) Drum Size - 203872

• 200 Litre (55 Gallon) Drum Size - 204254

• 1040 Litre (275 Gallon) Drum Size - 222087

SKU: 203872, 204254, 222087

The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece centre section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.

• Overall improved efficiency (up to 40% more efficient)

• Highest fluid flow rate in its class

• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps

• Expanded material offering to handle endless applications

• Offered in ATEX configuration.

• Expanded material offering to handle numerous applications

• Flow rates up to 1,135 lpm (300 gpm)

• Modular stall-resistant air valve design

• Complete 3 inch family of diaphragm pumps available in aluminium or polypropylene centre sections

• Heavy-duty construction

  Three configurations available:

• High chemical resistance where PFTE/stainless is required (POLY Ball, PTFE Ball, PTFE Diaphragm) -652404

• Waste oil, Diesel etc (Geo Seat, Geo Balls, Geo Diaphragm) - 652134

• Oil, Unleaded Fuel, Coolant (TPE Seat, Acetal Balls, TPE Diaphragm) - 652090

SKU: 652404, 652134, 652090

The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve, which provides a smooth and rapid changeover.

• Overall improved efficiency (up to 40% more efficient)

• Highest fluid flow rate in its class

• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps

• Expanded material offering to handle endless applications

• Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without un-installing the diaphragm pump

• 51 mm (2 in.) ANSI end-porting

• Fluid flow up to 568 lpm (150 gpm)

• Fluid pressure to 8.4 bar (0.84 MPa, 120 psi)

• Lube-free operation

• Epoxy-coated air section for tough environmental conditions

  Three configurations available:

• High chemical resistance where PFTE/stainless is required (Stainless Steel Seat, PTFE Ball, PTFE Diaphragm) -DVD311

• Waste oil, Diesel etc (Geo Seat, Geo Balls, Geo Diaphragm) - DFCGGG

• Oil, Unleaded Fuel, Coolant (TPE Seat, Acetal Balls, TPE Diaphragm) - DFC525

SKU: DVD311, DFCGGG, DFC525

The Husky 1590 air-operated diaphragm pump features a patented, high-reliability closed centre air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.

• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class

• Expanded material offering to handle endless applications

• Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without un-installing the diaphragm pump

• Offered in ATEX configuration.

• 38.1 mm (1-1/2 in.) ANSI end-porting

• High flow – 378 lpm (100 gpm) in a compact, portable size

• Fluid pressure to 8.4 bar (0.84 MPa, 120 psi)

• Lube-free operation

• Available in polypropylene, aluminium and stainless steel

• Epoxy-coated air section for tough environmental conditions

  Three configurations available:

• High chemical resistance where PFTE/stainless is required (Stainless Steel Seat, PTFE Ball, PTFE Diaphragm) -DBD311

• Waste oil, Diesel etc (Geo Seat, Geo Balls, Geo Diaphragm) - DBCGGG

• Oil, Unleaded Fuel, Coolant (TPE Seat, Acetal Balls, TPE Diaphragm) - DBC525

SKU: DBD311, DBCGGG, DBC525

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece centre section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  • Up to 5x longer diaphragm life for less maintenance and down-time

• Modular Air Valve

  • Stall-free, low pulsation operation provides smooth and rapid changeover

• One-Piece Center Section

  • Eliminates air leaks for more efficient operation

• Four-Bolt Joint Design

  • Bolted design provides even sealing pressure for leak-free operation

• Multiple Ports

  • Increased number of ports for installation flexibility

• Optional Features

  • DataTrak™ – Run-away protection and tracks material usage

  • Pulse Output - Cycle count capability

• Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation

• 30% more efficient than the market leader

• 20% increase in fluid flow compared to the Husky 1040

  Three configurations available:

• High chemical resistance where PFTE/stainless is required (Stainless Steel Seat, PTFE Ball, PTFE Diaphragm) - 651032

• Waste oil, Diesel etc (Geo Seat, Geo Balls, Geo Diaphragm) - 647121

• Oil, Unleaded Fuel, Coolant (TPE Seat, Acetal Balls, TPE Diaphragm) - 647097

SKU: 651032, 647121, 647097