MORE ITEMS BEING ADDED DAILY
IF YOUR REQUIRED ITEM IS NOT LISTED THEN PLEASE CONTACT US AS OUR FULL RANGE OF STOCK MAY NOT BE LISTED HERE
MORE ITEMS BEING ADDED DAILY
IF YOUR REQUIRED ITEM IS NOT LISTED THEN PLEASE CONTACT US AS OUR FULL RANGE OF STOCK MAY NOT BE LISTED HERE
The Husky 1590 air-operated diaphragm pump features a patented, high-reliability closed centre air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.
Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class
Expanded material offering to handle endless applications
Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without un-installing the diaphragm pump
Offered in ATEX configuration.
38.1 mm (1-1/2 in.) ANSI end-porting
High flow – 378 lpm (100 gpm) in a compact, portable size
Fluid pressure to 8.4 bar (0.84 MPa, 120 psi)
Lube-free operation
Available in polypropylene, aluminium and stainless steel
Epoxy-coated air section for tough environmental conditions
Three configurations available:
High chemical resistance where PFTE/stainless is required (Stainless Steel Seat, PTFE Ball, PTFE Diaphragm) -DBD311
Waste oil, Diesel etc (Geo Seat, Geo Balls, Geo Diaphragm) - DBCGGG
Oil, Unleaded Fuel, Coolant (TPE Seat, Acetal Balls, TPE Diaphragm) - DBC525
SKU: DBD311, DBCGGG, DBC525
The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece centre section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life
Up to 5x longer diaphragm life for less maintenance and down-time
Modular Air Valve
Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section
Eliminates air leaks for more efficient operation
Four-Bolt Joint Design
Bolted design provides even sealing pressure for leak-free operation
Multiple Ports
Increased number of ports for installation flexibility
Optional Features
DataTrak™ – Run-away protection and tracks material usage
Pulse Output - Cycle count capability
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
30% more efficient than the market leader
20% increase in fluid flow compared to the Husky 1040
Three configurations available:
High chemical resistance where PFTE/stainless is required (Stainless Steel Seat, PTFE Ball, PTFE Diaphragm) - 651032
Waste oil, Diesel etc (Geo Seat, Geo Balls, Geo Diaphragm) - 647121
Oil, Unleaded Fuel, Coolant (TPE Seat, Acetal Balls, TPE Diaphragm) - 647097
SKU: 651032, 647121, 647097
The powerful, new, easy-to-use Graco GLC X auto lubrication controller captures more information more ways, so operators, technicians and managers can make faster, smarter decisions that drive more productivity.
Indoor/Outdoor Mountable (IP69K) – Designed to withstand all the elements, including high-pressure washes and inclement weather encountered at the harshest and dirtiest sites.
Easy-to-Read LED Screen – Soft amber LED lighting capable of displaying text codes, faults and other data clearly in any ambient light without distracting operators.
Real-Time System Reporting – Program and display a wide range of customizable functions – including lubrication intervals, pressure limits, lubricant levels and more.
Smart Device and Mobile App – With the Auto Lube™ pap, monitor lubrication levels, configure settings, track history and share important diagnostics.
Universal Compatibility – One controller for all your lubrication systems simplifies training and inventory.
Active Current Protection – 9-30 VDC, 10 Amp continuous power supply protects grease pumps from over current and entire system from misfires, electrical shorts and surges
SKU: 26A855
Pre-configured pump kits for injector or divider valve based systems give you maximum flexibility
Optional Graco controller, level indicator, pressure switch, follower plates and drum covers put you in control of your system-no more second guessing
Convenient pressure and flow control built-in
Hydraulic control module-all your controls in one package for easy system setup and maintenance
Dyna-Star 10:1 90 lb (41 kg) pump module – injector – overall height 42.75 in (1086 mm)
SKU: 247444
For use with single line, parallel, injector based automatic lubrication systems
Pressure Switch, 1/4” NPT(f) inlet, DIN 43650 connector (1 NO/1 NC), 500 bar (7,250 psi)
IP65 rated for harsh environments. Fluoroelastomer seals are suitable for use in high temperature environments and synthetic lubricants.
SKU: 24N181
The GLC 2200 controller helps protect components by alerting you to lube events, failures and low lubrication levels. You have peace of mind knowing your investment is protected.
Mount in-cab to control automatic lubrication systems
Easy to mount without having to open up the control box
LEDs let you know what your system is doing at a glance
Easy to read digital display makes it simple to program and monitor your equipment
In-cab visual and audible alarms let the operator know your equipment needs attention. Or set up a remote alarm to alert service or maintenance staff
Simple icon based push buttons make programming easy
Colour coded wiring harness with flying leads and easy to follow wiring diagrams makes installations efficient
SKU: 24N468
Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, reducing expensive component failures to keep your equipment working.
Electric pumps for heavy duty automatic lubrication and transfer systems.
Auto Fill Shut Off – mechanical shut off of fill pump for clean and efficient refill
Graco Advantage Drive™ – heavy duty gear drive – lubed for life
Tube-in-tube vent and fill path – convert drum to injector system instantly
Vent valve mounted directly to pump – no more brackets or extra hoses and pipes
Motor control – speed and AMP control
Cold weather performance (-40°C)
More efficient seal replacement
Remote Fill Manifold with Vent (with built in pressure gauge) allows you to conveniently locate the fill port where you want it
SKU: 77X203
Heavy-duty construction and mining equipment rely on fresh lubricant to flush contaminants from critical pivot points. An automatic lubrication system from Graco provides continuous lube replenishment, reducing expensive component failures to keep your equipment working.
Electric pumps for heavy duty automatic lubrication and transfer systems.
Auto Fill Shut Off – mechanical shut off of fill pump for clean and efficient refill
Graco Advantage Drive™ – heavy duty gear drive – lubed for life
Tube-in-tube vent and fill path – convert drum to injector system instantly
Vent valve mounted directly to pump – no more brackets or extra hoses and pipes
Motor control – speed and AMP control
Cold weather performance (-40°C)
More efficient seal replacement
Remote Fill Manifold with Vent (with built in pressure gauge) allows you to conveniently locate the fill port where you want it
SKU: 77X202
The Graco Compact Dana-Star automatic lubrication system delivers high-capacity flow, robust durability and innovative control in a smaller footprint to extend uptime for today’s toughest earthmoving machines and users in the harshest environments.
Compact Power – Fits easily in space-limited applications; powerful enough to keep up with aggressive lubrication interval.
Smart Power Train - 24 VDC, brush-less motor and zero maintenance gear drive delivers lubricants on time, even at -40°C.
Rugged Durability – Metal construction ensures trustworthy operation in the most extreme environments.
Intelligent Monitoring - Optional pressure and lubricant level sensors provide useful system information, in real time.
Integrated Auto-Fill Shut-Off - Option enables single-person, powered-down, ground-level refills, without the need to climb or worry about spills.
SKU: CD3364
The Graco Compact Dana-Star automatic lubrication system delivers high-capacity flow, robust durability and innovative control in a smaller footprint to extend uptime for today’s toughest earthmoving machines and users in the harshest environments.
Compact Power – Fits easily in space-limited applications; powerful enough to keep up with aggressive lubrication interval.
Smart Power Train - 24 VDC, brush-less motor and zero maintenance gear drive delivers lubricants on time, even at -40°C.
Rugged Durability – Metal construction ensures trustworthy operation in the most extreme environments.
Intelligent Monitoring - Optional pressure and lubricant level sensors provide useful system information, in real time.
Integrated Auto-Fill Shut-Off - Option enables single-person, powered-down, ground-level refills, without the need to climb or worry about spills
SKU: CD2324
The AFSO feature automatically shuts off lubricant flow from a fill pump to the G3 reservoir once the G3 reservoir is full, eliminating the need to monitor the reservoir level during refilling. The G3 AFSO is based on the same design concept as the Auto-Fill Shutoff offered in conjunction with the robust Electric Dyna-Star product line.
Available in 4L, 8L, 12L and 16L
SKU: 4L 571286, 8L 571287, 12L 571288, 16L 571289
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Pro has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element – standard, plus room for two more. The ultimate in flexibility – for a high value, custom fit on your application.
Built-in controller with selectable pump on/pump off timer
Low level indicator provides low warning and shut-down alarm
Manual run initiates lube cycle on-demand (remote option also available)
Password protection safeguards settings
Pre-lube function can initiate lube cycle on start-up
Available in either 4 Litre or 8 Litre
Other configurations available upon request
SKU: 4L 96G068, 8L 96G069
Extend machinery life, reduce operating costs and increase productivity with a Graco G3 today! The G3 Standard has a flexible design that works with injector-based and series progressive systems. A cost-effective pump designed to serve multiple markets and applications. Includes one adjustable pump element – standard, plus room for two more. The ultimate in flexibility – for a high value, custom fit on your application.
No internal controller–use with separate or existing machine control for a low cost solution
Capable of sending a low level signal to your external controller or PLC
Available in either 4L or 8L
Other configurations available upon request
SKU: 4L 96G048, 8L 96G049
LCD panel & remote control with 24-hour timer
Easy to read water level sight tube gauge
Easy to refill water inlet or use 3/4 hose fitting
Large castors with brake
240V/50HZ 650W 3 speed motor
Fan diameter is 24"/60cm
Oscillating fan with adjustable swing louvre
Airflow of 12,000 cubic metres per hour
Maximum cooling area is 150sqm
Tank capacity is 70L
Maximum water consumption is 10L/H
Fully mobile with sturdy lockable front wheels
Dimensions are 92.5cm x 58cm x 144cm
SKU: AAPKA24
20kg drum grease kit designed for greasing all day every day
Kit includes grease pump, drum cover, follower plate, carry handle, 4m hose, z swivel, control valve and 3 jaw coupler
High pressure metal to metal valving performs faultlessly year after year
Easy to use carry handle for busy workshops
Heavy duty a 55:1 ratio air operated motor grease pump
Screw on tight drum cover
Handles high density tacky grease up to NLGI2 even on cold mornings
High delivery rate of 0.9kg per minute
Grease pressures up to 7950psi (548 bar)
Adjustable bung adaptor makes kit compatible with various drum sizes
SKU: 424170
Alemlube hand operated gear, engine differential & hydraulic oil transfer drum pump
Includes 140MM plastic extension to adjust to the length of new Castrol drum sizes
Delivers up to 110ml fluid on the down stroke
Rieke adaptor allows a variety of 20L drums to be used
Drain back nozzle holder
Push down pump operation
Non-drip nozzle, UV stabilised hose,
Replaceable stainless steel mesh filter
Suitable for car servicing workshops
SKU: 8828N2
Alemlube diesel auto shut off nozzle
Suitable for diesel and biodiesel up to B5
High flow rate of 140L/min
Maximum working pressure 40psi (2.8 bar)
3 speed lever with removable latch
Soft PVC cover
Mesh inlet filter
Automatically shuts off when a drum is full
SKU: 51040
Alemlube diesel auto shut off nozzle
Suitable for applications using an electric diesel transfer pump only
High flow rate of 120L/min
Aluminium body with buna-n & viton seals
Maximum working pressure 50psi (3.5 bar)
1" BSP(f) swivel
Automatically shuts off when a tank is full
SKU: 51039
4 drum rack storage & spill container
Made from high quality 100% recyclable polyethylene
Securely stacks 4 x 205L drums
Spill container sump capacity 450L
Weather & chemical resistant
Easily moved by forklifts & pallet jacks
Yellow in colour for easy identification
Size 1375mm W x 940mm D x 390mm H
SKU: SJ-200-100
EL Series two drum spill container
Manages static spill situations for two IBCs
Made from high strength polyethylene
Supplied with a sump plug for draining
Manage static spills safely & efficiently
High visibility yellow pallet with black grate
Removable platform for cleaning
Nestable design for easy storage
Easily moved by a forklift
Creates an OH&S compliant workplace
Complies to Australian storage & handling standards AS 1940-2017
1300mm W x 680mm D x 450mm H
SKU: SC60080
EL Series single IBC spill container
Manages static spill situations for single IBCs
Made from high strength polyethylene
Supplied with a sump plug for draining
Fill capacity 1000L
High visibility yellow pallet with black grate
Removable platform for cleaning
Nestable design for easy storage
Easily moved by a forklift
Creates an OH&S compliant workplace
Complies to Australian storage & handling standards AS 1940-2017
1350mm W x 1350mm D x 900mm H
SKU: SC60040
EL Series double IBC spill container
Manages static spill situations for two IBCs
Made from high strength polyethylene
Supplied with a sump plug for draining
Fill capacity 850L each
High visibility yellow pallet with black grate
Removable platform for cleaning
Nestable design for easy storage
Easily moved by a forklift
Creates an OH&S compliant workplace
Complies to Australian storage & handling standards AS 1940-2017
2200mm W x 1300mm D x 500mm H
SKU: SC60050
EL Series four drum spill container
Manages static spill situations for up to 4 x 205L drums
Made from high strength polyethylene
Supplied with a sump plug for draining
Manage static spills safely & efficiently
High visibility yellow pallet with black grate
Removable platform for cleaning
Nestable design for easy storage
Easily moved by a forklift
Creates an OH&S compliant workplace
Complies to Australian storage & handling standards AS 1940-2017
1300mm W x 1300mm D x 300mm H
SKU: SC60090
Alemlube heavy duty hand operated diesel drum pump
Suitable for the transfer of diesel, machine oil, lube oil, petrol & kerosene
Suitable for transferring from 60L & 205L drums & bulk tanks
Cast alloy body with delivery rates up to 18L/min.
2.2m of anti static fuel hose
1300mm length with 2" bung adaptor can be reversed operated
Includes bung adaptor, rubber gasket, four chamber rotor assembly, spout & spout holster
SKU: 501A
Lockable and portable diesel refuelling storage & dispensing kit
Fully portable with a unique user friendly design
Full security with a lockable lid and recesses for tie down straps
forklifting capability
Maximum flow rate up to 50L per minute
Polyethylene tank with built-in nozzle holder and 12V pump
4 metre long antistatic delivery hose
2 metre long battery cable
Auto shut off nozzle with digital flow meter nozzle option
Ideal for portable use such as on back of a ute or on service vehicle
Available in 100L, 200L, 450L, 600L, 800L and 1000L
SKU: 100L L10040PA, 200L L20040PA, 450L L45040PA, 600L L60040PA, 800L L80040PA, 1000L L100040PA
C-LM5 grease injector for Liebherr R926 / R9100 / R9150 / R9200 / R9250 / R9350 / R9400 / R9600 / R9800 / R994 / R995 / R996
Equivalent to Liebherr Part Number 10219519
Also equivalent to SKF553-34162-2-L
TECHNICAL CHARACTERISTICS
Output volume :0.5 cm³to 5 cm'/ stroke (infinitely adjustable)
Operating pressure: 1 to 6 Minimum: 128 bar, Standard: 173 bar, Maximum: 240 bar, Relief pressure < 80 bar
Operating temperature: -40°C to + 93°C
Alemlube Rewinda series industrial quality oil hose storage & retrieval system
15m x 12mm ID with 0.9m lead in hose
High pressure SAE 100R1 AT wire braid hose
1/2" BSPT(f) inlet hose & 1/2" BSTP(m) outlet hose connections
1/2" BSPT(f) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation fits other leading brands
Maximum working pressure 2320psi (160 bar)
Working temperature from -40°c to +100°c
Weight of 17kg
SKU: AR1215OB
Alemlube Rewinda series industrial quality chemical & pesticide hose storage & retrieval system designed to handle acids and chemicals
20m x 10mm ID with 0.9m lead in hose
Pesticide, weedicide & chemical resistant PVC hose
3/8" BSPT(m) inlet hose & 1/4" BSTP(m) outlet hose connections
3/8" BSPT(f) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation & fits other leading brands
Maximum working pressure 300psi (20 bar)
Working temperature from 0°c to +60°c
Weight of 12kg
SKU: AR1020WPR
Alemlube Rewinda series high pressure hot water washdown hose storage & retrieval system
20m x 10mm ID with 0.9m lead in hose
High heat resistant SAE 100R2 wire braid hose
3/8"" BSPT(m) inlet hose & 3/8"" BSP(m) outlet hose connections
3/8"" BSPT(f) hose reel inlet thread
Hose bend restrictors ensure a long service life for your hose assemblies
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation & fit other leading brands
Maximum working pressure 3000psi (206 bar)
Working temperature from -40°c to +120°c
Weight of 21kg
SKU: AR1020HPWR
Alemlube Rewinda series industrial quality hose storage & retrieval system
25m x 12mm ID with 0.9m lead in hose
Highly quality synthetic rubber hose for hot water & hose bend restrictors ensure a long service life for your hose assemblies
1/2" BSPT(m) outlet & 3/4" BSP(f) inlet hose connections
1/2" BSPT(f) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation fit other leading brands
Maximum working pressure 300psi (20 bar)
Working temperature from -20°c to +100°c
Weight of 17kg
SKU: AR1217HWR
Alemlube Rewinda series industrial quality oil hose storage & retrieval system
15m x 6mm ID with a 0.9m lead in hose
High pressure SAE 100R2 wire braid hose
1/4" BSPT(m) inlet and outlet hose connections
1/4" BSPT(f) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation & fits other leading brands
Maximum working pressure 5,800psi (400 bar)
Working temperature from -40°c to +100°c
Weight of 16kg
SKU: AR615GB
Alemlube Rewinda danger safety barrier reel
Supplied with 30m x 48mm red and white safety band
Updated mounting brackets offer multiple mounting positions including columns, steel brackets, wood & common walls
The accessory package includes a magnet & screw expansion tube to assist in barrier reel set up
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the band retracts at a safe & steady speed with speed control brake system
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 reel rotation & fits other leading brands
A must for addressing workplace and employee safety
Weight of 9.5kg
SKU: AR30DBRR
Alemlube Rewinda caution safety barrier reel
Supplied with 30m x 48mm yellow and black safety band
Updated mounting brackets offer multiple mounting positions including columns, steel brackets, wood & common walls
The accessory package includes a magnet & screw expansion tube to assist in barrier reel set up
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the band retracts at a safe & steady speed with speed control brake system
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 reel rotation & fits other leading brands
A must for addressing workplace and employee safety
Weight of 9.5kg
SKU: AR30CBRY
Alemlube Rewinda series industrial quality propane welding has hose reel storage & retrieval system
20m x 6mm ID with 0.9m lead in hose
Grade T heat resistant gas welding hose
5/8" UNF(f) inlet & 5/8" UNF(f) outlet connections
5/8" UNF(f) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation & fits other leading brands
Maximum working pressure 300psi (20 bar)
Working temperature from -20°c to +60°c
Weight of 12.8kg
SKU: AR620PR
Alemlube Rewinda series oxy propane hose reel storage & retrieval system
15m x 6mm Twin ID hoses with 0.9m lead in hoses
Grade T heat resistant oxy propane welding hoses
5/8" UNF(f) left & 5/8" UNF(f) right inlet hose connection
5/8" UNF(m) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation & fits other leading brands
Maximum working pressure 300psi (20 bar)
Working temperature from -20°c to +60°c
Weight of 15.7kg
SKU: AR615OPR
Alemlube Rewinda series argon welding gas hose reel storage & retrieval system
20m x 6mm ID with 0.9m lead in hose
Grade R heat resistant gas welding hose
5/8" UNF(f) right inlet & 5/8" UNF(f) right outlet connection
5/8" UNF(f) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation & fits other leading brands
Maximum working pressure 300psi (20 bar)
Working temperature from -30°c to +60°c
Weight of 12.6kg
SKU: AR620AR
Alemlube Rewinda series oxy acetylene hose reel storage & retrieval system
15m x 6mm Twin ID hoses with 0.9m lead in hoses
Grade R heat resistant welding hoses
5/8" UNF(f) left & 5/8" UNF(f) right hose connection
5/8" UNF(m) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation & fits other leading brands
Maximum working pressure 300psi (20 bar)
Working temperature from -20°c to +60°c
Weight of 15.8kg
SKU: AR615OAR
Alemlube Rewinda series industrial quality electrical cable reel hose storage & retrieval system
Supplied with 20m of 3 core x 1.5mm2 cable plus a 1.5m lead in cable
H07RN-F heavy duty rubber electrical power cable
240V voltage 10 Amp power supply
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Sliding guide mechanism ensures the hose returns evenly to the barrel assembly
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation and fits other leading brands
1.5m lead in cable
Weight of 13kg
SKU: AR1024020CRR
Alemlube Rewinda series industrial quality electrical cable reel hose storage & retrieval system
Supplied with 20m of 3 core x 1.5mm2 cable plus a 1.5m lead in cable
H07RN-F heavy duty rubber electrical power cable
240V voltage 15 Amp power supply
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Sliding guide mechanism ensures the hose returns evenly to the barrel assembly
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation and fits other leading brands
1.5m lead in cable
Weight of 13kg
SKU: AR1524020CRR
Alemlube Rewinda series industrial quality compressed air hose storage & retrieval system
20m x 12mm ID with 0.9m lead in hose
Highly flexible Gen3 hybrid polymer hose bend restrictors ensure a long service life for your hose assemblies
1/2" BSPT(m) inlet/outlet connections
1/2" BSPT(f) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe & steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation fit other leading brands
Maximum working pressure 300psi (20 bar)
Working temperature from -40°c to +80°c
Weight of 14kg
Available in either Red or Blue cover
SKU: AR1220CAR/AR1220CAB
AR1020CAR
Alemlube Rewinda series industrial quality compressed air hose storage & retrieval system
20m x 10mm ID with 0.9m lead in hose
Highly flexible Gen3 hybrid polymer hose and hose bend restrictors ensure a long service life for your hose assemblies
3/8" BSPT(m) inlet/outlet connections
3/8" BSPT(f) hose reel inlet thread
High grade impact resistant UV stabilised covers wont fade over time
Patented speed rewind control system ensures that the hose retracts at a safe and steady speed with speed control brake system
Patented stop-at-any-point latching system secures the hose at the exact desired length every time
Sliding guide system ensures that the hose returns neatly & evenly on to the barrel assembly
Detachable steel mounting bracket enables 180 hose reel rotation & fits other leading brands
Maximum working pressure 300psi (20 bar)
Working temperature from -40°c to +80°c
Weight of 13kg
SKU: AR1020CAR/AR1020CAB
GRACO 24X817
High volume output at high pressures for the most demanding applications
The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customisation to a variety of applications
Includes an adjustable hex head nut to make adjusting the output simple
No vent holes and fully enclosed press fittings to prevent leaking lubricant
Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly
Rugged, single piece uni-body design built for the harshest environments
Also equivalent to Lincoln SL-V XL 85782
SKU: 24X817
GRACO 24X807
High volume output at high pressures for the most demanding applications
The GL-1 X injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customisation to a variety of applications
Includes an adjustable hex head nut to make adjusting the output simple
No vent holes and fully enclosed press fittings to prevent leaking lubricant
Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly
Rugged, single piece uni-body design built for the harshest environments
Also equivalent to Lincoln SL-V 85772
SKU: 24X807
GRACO GLl-1 114909
High volume output at high pressures for the most demanding applications
The GL-1 injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
Includes an adjustable hex head nut to make adjusting the output simple
No vent holes and fully enclosed press fittings to prevent leaking lubricant
Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly
Rugged, single piece uni-body design built for the harshest environments
Also equivalent to LINCOLN SL1 81713
SKU: 114909